@Mail.ru
INNTECHGROUP - Equipment for the production of aerated concrete (non-Autoclaved Aerated Concrete)


Completing units of classical technology plant


Capacity: Rated - 24,5 cub.m /day, Maximal 49,0 cub.m /day

Name

Measurement

Qnty

Photo

Self-moving mixer for aerated concrete 0,72 cub.m. (operating panel)

1

Mixing unit (Self-moving mixer for aerated concrete, suspension mixer)

pcs

1

Aerated concrete mixer is designed for mixing and forced activation of components of aerated concrete mixture The mixers drive is located on the upper lid, and executed with a belt transmission. Aerated concrete mixer is equipped with a reliable bearing assembly that eliminates vibration. On vertically placed shaft there is a mixing nozzle of plate type that provides high-quality mixing. Mixers moving is provided by drive on the gear motor basic. Aerated concrete mixer is equipped with control panel.

2

Rail track for the mixer (longitudinal guides)

Track meter

26

The track is a set of guide for the movement of the mixer along the working room. Guides are equipped with fasteners that greatly simplifies the installation.

Components dosing unit

 

3

Power hoist for bulk materials, lifting ability 600 kg.
Not included in the base price **

pcs

1

Power hoist for bulk materials is designed for loading of sand and cement into the mixer. Hoists reservoir (can) moves by electric telpher on the cable from the floor level to mixers cap level. Hoists can (tin) with the required amount of components delivers content into the mixer.. Power hoists construction, its frames are made from square section profile that provides stability and rigidity.

4

Electronic scales for dispensing components, up to 600 kg
Not included in the base price **

pcs

1

 

For weighing and dispensing of bulk components scales with a limit weighing = 600 kg are used.

5

Electronic scales for additives dosing

pcs

1

 

Electronic scales with 5 kg limit weighing are used for chemical additives dosing.

 

6

The metering unit of water (flow metering device with electronic control)

pcs

1

7

Intermediate water tank (Reservoir 300 l, wall fixing)

pcs

1

Water metering unit consists of water tank, providing a fast draining of the hot water into the mixer and dosing unit with electronic control. Dosing is carried out automatically by a predetermined value. With the remote control the quantity entered in the memory and dosing is carried out by pressing a single button.

 

Cutting a cake unit

 

8

Set of saws to cut a cake

set

1

9

Jig for cutting a cake

pcs

1

Cutting unit consists of jig for cutting, saws for cutting crusts and for across cutting.The jig is attached to the mold with a cake cured enough for cutting. This kit provides a cutting aerated concrete blocks with dimensions 600x300x100, 600x300x200 and then multiply 100 mm, with the geometric accuracy of + / - 2mm. It is also possible to produce the jig under other required block sizes.

 

Mold for aerated concrete pouring

 

10

Mold (2,01,20,3 m)

.

34

Mold to fill the cake represents the prepared base to install the boards. It consists of metal frame providing construction rigidity. Mold is required to expose clearly the level and rigidly fix the position. After installment the mold inner part is poured by cement mixture and finally leveled the filling floor.

11

Set of molds boards (2 L-shape boards, fixing elements)

set

17

 

Accurate fitting of parts eliminates potential leak virtually. Set of boards consists of 2 L-shape boards and fixing elements. 2 workers carry out the molds assembling.

 

Technology

 

12

Training non-autoclave aerated concrete production technology

service

1

 

Training technology includes: providing full set of documents - technological regulations, instructions for production workers, telephone consultation



Technologist arriving at the clients production place is possible with a surcharge.

 

Set of spare part

 

13

Minimum set of chemical raw materials for commissioning and production of the first batch of products

set

1

 

14

Set of wearing parts

set

1

 

. This kit includes a set of bearings, gaskets, belts and other items subjected to heavy wear. Also the kit includes a minimal set of tools which are necessary for the operation of the line - brushes, spatulas, measuring tanks, etc.

 

@Mail.ru